subject: replacement filters for CuZn wh10 Filter
I’m looking for whole-house water filtration that removes primarily chlorine.
Interested in low running costs.
Which is better, CuZn or active carbon?
I understand that active carbon removes chlorine etc whereas CuZn water filters converts it to a different chemical compound. Has there been any scientific tests of the health aspects of these converted compounds?
Have the CuZn filters been FDA approved?
Archive for Replacement Cartridges
I am looking for a US Filter (AMETEK) replacement cartridge
The number is 155153-3
It’s a carbon filter that needs replacement for my water purificiation unit.
The cartridge looks more like a GAC CC-BB cartridge with the measurements
The one I see online is 155153 GAC-BB Water Filter. It shows some type of cone shape in top if the filter cartridge that is not on the original cartridge.
The original measures 9 3/8″ high x 4 5/8 diameter.
Is this a direct replacement?
Thanks for your inquiry.
The USFilter GAC cartridges are indeed different from the other carbon and sediment filters.
Ametek Carbon Filters Continued »
This is a 100 micron sediment filter and I would like to know where to get it.
Thanks for your help.
The W50PEHDA you mentioned is an American Plumber Sediment Filter, but it’s not 100 micron as you indicated. It’s a Fifty micron sediment removal filter. The equivalent would be the R50-BB which is 155053-51 R50 Big Blue / 4-1/2″ x 9-3/4″ approx. size.
i have an under the cabinet culligan aqua-clear three stage system.
the serial number on the back is ac 10057618 and it shows ac30 premium, ac30m, and ac30l.
i believe its two filters and a reverse osmosis cartridge.
What are the replacements needed for this one?
The Culligan Aqua Clear RO filters all use the same granular activated carbon pre-filter, the same activated carbon post filter, and the same particulate filter.
However the reverse osmosis module/membrane varies between the units.
Also, the size of the post filter is different.
I have a Ametek HD-10-R50 filter system. I need to know what are my choices in filters. Can you provide the item numbers and descriptions and the micron size for the ones available? Thanks.
You have a filter that’s approx. 10″ height, and 4 1/2″ width. Is this Correct?
If yes, you need a 10″ ‘BB’ Big Blue filter.
The one you currently use, or mentioned, is a sediment filter, 50 micron, to remove large particles from water.
I have an old counter top Ametek model CTR-00 water filter and I need to purchase cartridges (item 155403 CBR2-10R) and I have no way to find out if this cartridge will fit my old model.Do you have more information and tell me if this cartridge will fit my old model
We moved into a home that has a Ametek CSJ-C1 filter installed.
We would like to buy some replacement taste/odor filter cartridges. I
measured the old cartridge and it appears to be 9 3/4 by 2 1/2.
What choices do we have?
Thanks for contacting us.
First off, we don’t recommend. We only suggest.
Iron Water Filters Continued »
Looking for replacement cartridges for a water filtration system. The cartridgers are 4 inches in diameter and 20 inches long with a 1 inch diameter hole in each end. Need case prices of 1 and 5 micron filters
You need a “Big Blue” 20″ cartridge.
In order to provide a suggestion, we need to know for what the filter is used:
o To remove sediment and particles (general filtration)
o Or to remove taste and odor (provide drinking water)
We’ll await your reply… Remove Sediment and Bacteria from lake water Continued »
subject: ametek replacement membrane for ro-2127
Reply: with ANY kind of helpful information about this
The Membrane is online aka CTA-15.
Full water filters replacement set for the RO-2127 is online too.